How to Organize Cables with GearLine System
By Nite Ize | Published: 2026-10-30
Category: How-to Guides
Learn how to use the GearLine Organization System to tidy cords and cables at home, at the office, or on the go with simple, adjustable steps.
Quick Answer
Use the GearLine System to hang cables and cords anywhere with its adjustable Gear Ties, S-Biners, and bar-tacked loops for a flexible, removable organization setup.
Why GearLine Works for Cables
The GearLine is a 4-foot webbing line with multiple bar-tacked loops and colorful plastic S-Biners, plus an adjustable 12-inch Gear Tie on each end. This design lets you attach it almost anywhere—desk edges, shelves, headboards, or tent poles—without permanent mounting. Because the line is flexible, you can route it horizontally or vertically to match your space, and the S-Biners let you clip cables individually so they stay separated and tangle-free.
Steps to Organize Cables with GearLine
- Choose a mounting spot: Decide where you want to keep cables—under a desk, along a wall, or inside a cabinet. Use the Gear Ties on each end to secure the line to a stable anchor like a table leg, shelf bracket, or hook. Make sure the line is taut enough to hold weight but not so tight that it strains the anchors. Check that the line is level and doesn't sag in the middle before loading cables.
- Sort and group your cables: Collect the cables you want to organize and group them by device or purpose (e.g., phone chargers, laptop cords, USB cables). Untangle each one and remove any that are broken or unused to reduce clutter. Use a label or color-coding on the S-Biners if you have many similar cables.
- Attach cables to the S-Biners: Clip each cable or cord onto a separate S-Biner along the line. For thicker cords, loop the cable around the biner before clipping to secure it. Avoid overloading a single biner with multiple heavy cables, as this can cause tangling and stress the loop. Leave enough slack between the device and the line so you can unplug or use the cable without pulling the line loose.
- Adjust and test accessibility: After attaching all cables, test each one by pulling it gently to ensure it stays clipped and doesn't slide off. Adjust the position of the S-Biners along the line to keep frequently used cables within easy reach and less-used ones toward the ends. Recheck the Gear Ties at the ends to ensure they haven't loosened after loading.
Product Facts
- GearLine® Organization System: The GearLine is a 4 ft webbing line with S-Biners attached to multiple bar-tacked loops, and an adjustable 12" Gear Tie on each end. This means you can hang cables at different points along the line and adjust the mounting to fit your space, keeping cords off surfaces and easy to reach.
GearLine® Organization System
