Zurück zum Blog
Anleitungen 2026-11-20 Nite Ize 0 Aufrufe

So verwenden Sie das SlideLock-Spannband beim Camping

So verwenden Sie das SlideLock-Spannband beim Camping

Erfahren Sie, wie Sie das CamJam SlideLock Adjustable Bungee für Campingladungen wie Zelte und Ausrüstung einstellen, sichern und lösen. Praktische Tipps für Spannung und Befestigung.

Why an Adjustable Bungee Works for Camping

When you're securing a tent bag, tarp, or camp chair to your vehicle or pack, a fixed-length bungee often leaves you either stretching too tight or wrapping twice. The CamJam SlideLock Adjustable Bungee solves that by letting you set the exact tension without guesswork.

Its pull-to-tighten cam mechanism and easy-release lever give you control over the cord length, while the locking carabiners keep the bungee attached even when there's no load. That makes it a practical tool for camping gear tie-down.

What the CamJam SlideLock Adjustable Bungee Provides

  • CamJam® SlideLock® Adjustable Bungee: Adjustable length from 7” to 24” with a 5mm diameter wear-resistant cord. You can fit the bungee to loads of different sizes—from a small stuff sack to a bulky cooler—without needing multiple cords.
    CamJam® SlideLock® Adjustable Bungee
    CamJam® SlideLock® Adjustable Bungee
  • CamJam® SlideLock® Adjustable Bungee: Pull the cord to shorten and increase tension; lift the lever to lengthen and release. No more tying knots or double-wrapping. One hand adjusts the tension, and the lever gives you quick release when you unpack.
  • CamJam® SlideLock® Adjustable Bungee: Attached SlideLock carabiners lock the gate and can stay clipped even without tension. You can leave the bungee attached in your truck bed or trunk between trips, so it's always ready for the next load.

How to Adjust and Secure Your Bungee for Camping

The CamJam mechanism works by pulling the cord through a cam that locks when tension is applied. Here's how to use it step by step.

  1. Attach one end to your anchor point: Clip the SlideLock carabiner onto a secure loop or tie-down point in your vehicle, trailer, or pack frame. Push the gate until it clicks shut.
  2. Pull the cord to tighten around your load: Hold the cam mechanism (the black aluminum body) and pull the free end of the cord. The cam will lock automatically, keeping the bungee at the new shorter length with increased tension.
  3. Secure the second carabiner: Clip the other end to the load or another anchor. The self-clipping cap on the cord tail helps keep the loose end tidy and out of the way.
  4. Release tension when ready: Lift the lever on the cam mechanism. This releases the lock, letting you lengthen the cord and remove the bungee. The lever works even under moderate load.

Checkpoints Before You Rely on It

The supplied information confirms the bungee adjusts from 7” to 24” and uses a 5mm diameter heavy-duty cord. It does not specify a maximum load weight or breaking strength, so treat the bungee as a general-purpose tie-down for camping gear, not for heavy or sharp-edged loads that could exceed the cord's capacity.

The locking carabiners are made of durable plastic, not metal. They lock the gate securely but are not rated for climbing or overhead suspension. For camping tie-downs on the ground or in a vehicle, they work well.

If you're not satisfied, Nite Ize's Worry Free Guarantee covers repair, replacement, or exchange—just contact them via phone, email, or their online form.

Verwandte Artikel

Customer Service
Startseite
Produkte
Warenkorb
Profil